AVC-LAN Circuit

OTHER SYSTEM: CLOCK SYSTEM (w/ Multi-display): AVC-LAN Circuit
- AVC-LAN Circuit

DESCRIPTION

The clock assembly receives light control switch position information and GPS information via the AVC-LAN. When a short to +B or short to ground occurs in this AVC-LAN, the clock system will not function normally as communication is discontinued.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (CLOCK ASSEMBLY - DISPLAY AND NAVIGATION MODULE DISPLAY)

(a) Disconnect the L38 clock assembly connector.

(b) Disconnect the L116 display and navigation module display connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures