Installation

AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY





(a) Install the steering pad switch with the 4 screws.

(b) Connect the connector.

2. INSTALL STEERING PAD Installation

3. INSTALL SWITCH AND VOLUME CASE Installation

4. INSTALL NO. 2 STEERING WHEEL COVER LOWER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL BATTERY SERVICE HOLE COVER LH Installation

7. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

8. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

9. INSPECT STEERING PAD Installation

10. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.