Installation

3UR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL VVT SENSOR

(a) Install the 4 sensors with the 4 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)





(b) Connect the 4 sensor connectors.

2. INSTALL CAMSHAFT POSITION SENSOR





(a) Install the sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the sensor connector.

3. INSTALL AIR CLEANER HOSE ASSEMBLY Installation

4. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

5. INSTALL UPPER RADIATOR SUPPORT SEAL Installation

6. INSTALL ENGINE ROOM SIDE COVER RH Installation

7. INSTALL ENGINE ROOM SIDE COVER LH Installation