Reassembly

SEAT: REAR SEAT ASSEMBLY: REASSEMBLY

1. INSTALL REAR SEATBACK LOCK ASSEMBLY LH

(a) Install the rear seatback lock assembly LH with the 2 bolts.

Torque : 21 Nm (214 kgf-cm, 16 ft-lbf)

2. INSTALL NO. 2 REAR SEATBACK EDGE PROTECTOR

(a) Clean the installation surface of the rear seatback frame sub-assembly LH.

(b) Attach the 4 pieces of double-sided tape and install the No. 2 rear seatback edge protector to the rear seatback frame sub-assembly LH.

Text in Illustration

3. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

(a) Insert the rod of the rear seatback lock assembly LH to the rear seat lock control lever sub-assembly LH as shown in the illustration.

(b) Engage the guide.

(c) Install the rear seat lock control lever sub-assembly LH with the 2 screws.

4. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH

(a) Using hog ring pliers, install the separate type rear seatback cover LH to the separate type rear seatback pad LH with 11 new hog rings.

NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.

5. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD LH

(a) Temporarily install the separate type rear seatback cover with pad LH to the rear seatback frame sub-assembly LH.

(b) Engage the 4 claws to install the 2 rear seat headrest supports.

(d) Engage the 8 hooks.

(e) Install 9 new clips to the separate type rear seatback cover LH.

(f) Engage the 9 clips.

Text in Illustration

(g) Engage the fastener.

(h) Install the separate type rear seatback cover with pad LH with 2 new clips.

6. INSTALL REAR SEATBACK COVER LH

(a) Engage the 4 claws to install the rear seatback cover LH.

7. INSTALL REAR SEATBACK LOCK CONTROL LEVER BASE LH

(a) Engage the 5 claws.

(b) Install the rear seatback lock control lever base LH with the screw.

8. INSTALL REAR SEATBACK LOCK STRIKER COVER LH

(a) Engage the 2 guides and claw to install the rear seatback lock striker cover LH.

9. INSTALL REAR SEATBACK LOCK ASSEMBLY RH

(a) Install the rear seatback lock assembly RH with the 2 bolts.

Torque : 21 Nm (214 kgf-cm, 16 ft-lbf)

10. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY Installation

11. INSTALL REAR SEATBACK EDGE PROTECTOR

(a) Clean the installation surface of the rear seatback frame sub-assembly RH.

(b) Attach the 12 pieces of double-sided tape and install the rear seatback edge protector to the rear seatback frame sub-assembly RH.

Text in Illustration

12. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH

(a) Insert the rod of the rear seatback lock assembly RH to the rear seat lock control lever sub-assembly RH as shown in the illustration.

(b) Engage the guide.

(c) Install the rear seat lock control lever sub-assembly RH.

13. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH

(a) Using hog ring pliers, install the separate type rear seatback cover RH to the separate type rear seatback pad RH with 9 new hog rings.

NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.

(b) Engage the 2 hooks.

14. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD RH

(a) Temporarily install the separate type rear seatback cover with pad RH to the rear seatback frame sub-assembly RH.

(b) Engage the 4 claws to install the 2 rear seat center headrest supports.

(d) Engage the 4 hooks.

(e) Engage the 10 hooks.

(f) Install 9 new clips to the separate type rear seatback cover RH.

(g) Engage the 9 clips.

(h) Install the separate type rear seatback cover with pad RH with 3 new clips.

15. INSTALL REAR SEATBACK COVER RH

(a) Engage the 4 claws to install the rear seatback cover RH.

HINT
Use the same procedure for the LH side and RH side.

16. INSTALL REAR SEAT SHOULDER BELT COVER

(a) Engage the 4 claws to install the rear seat shoulder belt cover.

17. INSTALL SEAT BELT ANCHOR COVER CAP

(a) Engage the 2 claws to install the seat belt anchor cover cap.

18. INSTALL REAR SEATBACK LOCK CONTROL LEVER BASE RH

(a) Engage the 5 claws.

(b) Install the rear seatback lock control lever base RH with the screw.

19. INSTALL REAR SEATBACK LOCK STRIKER COVER RH

(a) Engage the 2 guides and claw to install the rear seatback lock striker cover RH.

20. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

(a) Using hog ring pliers, install 24 new hog rings.

(b) Using hog ring pliers, install 22 new hog rings.

(c) Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 21 new hog rings.