Installation

METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connector.

(b) Engage the 2 clips.

(c) Install the combination meter assembly with the 2 screws.

(d) Engage the clamp.

2. INSTALL METER HOOD SUB-ASSEMBLY Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE Installation

5. INSTALL DECK FLOOR BOX RH Installation

6. INSTALL REAR NO. 3 FLOOR BOARD Installation

7. INSTALL REAR DECK FLOOR BOX Installation

8. INSTALL REAR NO. 2 FLOOR BOARD Installation