Reassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

1. INSTALL NO. 2 DEFROSTER NOZZLE GARNISH

(a) Engage the 3 claws [A].





(b) Engage the 3 claws [B] and install the No. 2 defroster nozzle garnish as shown in the illustration.

2. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH

(a) Engage the 3 claws [A].





(b) Engage the 3 claws [B] and install the No. 1 defroster nozzle garnish as shown in the illustration.

3. INSTALL NO. 1 INSTRUMENT PANEL PIN

(a) Install the 4 No. 1 instrument panel pins with the 4 screws [I].





4. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation

5. INSTALL NO. 1 METER HOOD RETAINER

(a) Install the 2 No. 1 meter hood retainers with the 2 screws [I].





6. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

(a) Engage the 2 claws and install the automatic light control sensor.





7. INSTALL NAVIGATION ANTENNA ASSEMBLY Installation

8. INSTALL NO. 3 INSTRUMENT PANEL WIRE

(a) Engage the 3 clamps.





(b) Connect the connector and install the No. 3 instrument panel wire.

9. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY Installation

10. INSTALL NO. 2 HEATER TO REGISTER DUCT

(a) Install the No. 2 heater to register duct with the 4 screws [F].





11. INSTALL NO. 1 HEATER TO REGISTER DUCT

(a) Install the No. 1 heater to register duct with the 3 screws [F].





12. INSTALL DEFROSTER NOZZLE ASSEMBLY

(a) Install the defroster nozzle assembly with the 3 screws [F].





13. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT

(a) Install the side No. 2 defroster nozzle duct with the 2 screws [F].





14. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT

(a) Install the side No. 1 defroster nozzle duct with the 2 screws [F].