Installation

2GR-FSE ENGINE CONTROL SYSTEM: MASS AIR FLOW METER: INSTALLATION

1. INSTALL MASS AIR FLOW METER





(a) Install a new O-ring to the MAF meter.

(b) Install the MAF meter with the 2 screws.

(c) Connect the MAF meter connector.

2. INSTALL ENGINE ROOM SIDE COVER RH Installation

3. INSTALL COOL AIR INTAKE DUCT SEAL Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.