Check Mode Procedure

SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: CHECK MODE PROCEDURE

1. CHECK MODE (SIGNAL CHECK): DTC CHECK

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Select the "SIGNAL CHECK", and proceed checking with the Techstream.

NOTICE:
Select the "SIGNAL CHECK" from the "DTC CHECK" screen displayed on the Techstream to clear the output DTCs (both present and past).

HINT
* DTCs can be detected more sensitivity in check mode than in normal diagnosis mode.
* Perform check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.