Removal

HYBRID / BATTERY CONTROL: SERVICE PLUG GRIP: REMOVAL

1. PRECAUTION

HINT
Service Precautions.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

4. REMOVE BATTERY SERVICE HOLE COVER

(a) Slide the latch and remove the service hole cover.





5. REMOVE SERVICE PLUG GRIP

CAUTION:
* Wear insulating gloves.
* Remove the service plug grip to interrupt the high voltage circuit at the time of inspection or repair.
* Keep the removed service plug grip in your pocket to prevent other technicians from accidentally reconnecting it while you are servicing the vehicle.
* All the high voltage wiring connectors are orange.
(a) Wear insulating gloves and remove the service plug grip after sliding up the lever of the service plug grip as shown in the illustration.





CAUTION:
* Keep the removed service plug grip in your pocket to prevent other technicians from accidentally reconnecting it while you are servicing the vehicle.
* After removing the service plug grip, do not touch the high voltage connectors or terminals for 10 minutes.
HINT
Waiting for at least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.