Removal

HEATING / AIR CONDITIONING: COMPRESSOR (for 2GR-FSE): REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE INLET NO. 1 AIR CLEANER Removal

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

4. REMOVE V-RIBBED BELT Removal

5. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair

6. REMOVE ENGINE UNDER COVER

7. REMOVE REAR ENGINE UNDER COVER LH Removal

8. REMOVE DISCHARGE HOSE SUB-ASSEMBLY

(a) Remove the bolt and disconnect the discharge hose sub-assembly from the compressor and magnetic clutch.

(b) Remove the O-ring from the discharge hose sub-assembly.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

9. REMOVE NO. 1 COOLER REFRIGERANT SUCTION HOSE

(a) Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose from the compressor and magnetic clutch.

(b) Remove the O-ring from the No. 1 cooler refrigerant suction hose.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

10. REMOVE COMPRESSOR AND MAGNETIC CLUTCH

(a) Disconnect each connector.

(b) Remove the 3 bolts and nut.