Installation

2UR-GSE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL CAMSHAFT POSITION SENSOR

(a) Install the camshaft position sensor with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the camshaft position sensor connector.

2. INSTALL VVT SENSOR (for Bank 1)

(a) Install the 2 VVT sensors with the 2 bolts.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the VVT sensor connectors.

(c) Connect the 3 wire harness clamps.





3. INSTALL VVT SENSOR (for Bank 2)

(a) Install the 2 VVT sensors with the 2 bolts.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the VVT sensor connectors.

(c) Connect the wire harness clamp.





4. INSPECT FOR OIL LEAK

5. INSTALL V-BANK COVER SUB-ASSEMBLY Installation