Removal
2UR-GSE ENGINE CONTROL: INTEGRATION RELAY: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
2. REMOVE NO. 2 RELAY BLOCK COVER
3. REMOVE INTEGRATION NO.1 RELAY
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and pull up the integration relay.
(b) Disconnect the 3 connectors.