Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Start / Stop Switch: Testing and Inspection





2UR-GSE STARTING: ENGINE SWITCH: INSPECTION

1. INSPECT ENGINE SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:









If the resistance is not as specified, replace the engine switch.

(b) Apply battery voltage between the terminals of the switch, and check the illumination condition of the switch.

HINT
* If the positive (+) lead and the negative (-) lead are incorrectly connected, the engine switch indicator will not illuminate.
* If the voltage is too low, the indicator will not illuminate.

OK:









If the result is not as specified, replace the engine switch.