Removal

POWER ASSIST SYSTEMS: POWER STEERING ECU: REMOVAL

1. REMOVE BATTERY

(a) Disconnect the cable from the negative (-) battery terminal.

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(b) Disconnect the 2 clamps.





(c) Disconnect the cable from the positive (+) battery terminal.

(d) Remove the nut and the battery clamp.

(e) Remove the battery insulator.

(f) Remove the battery.

2. REMOVE NO. 1 BATTERY TRAY SUPPORT

3. REMOVE POWER STEERING ECU ASSEMBLY

(a) Release the locks of the 2 power steering ECU assembly connectors (A) and (B).





(b) Disconnect the connectors (A), (B) and (C) from the power steering ECU assembly.

(c) Remove the 3 bolts.





(d) Remove the power steering ECU assembly.