Removal

1UR-FSE ENGINE CONTROL SYSTEM: HEATED OXYGEN SENSOR (for AWD): REMOVAL

1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

(a) Disconnect the heated oxygen sensor connector.





(b) Using SST, remove the heated oxygen sensor from the front exhaust pipe.

SST : 09224-00010

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal

3. REMOVE COWL SIDE TRIM BOARD RH Removal

4. REMOVE FRONT FLOOR SILENCER PAD RH

5. REMOVE REAR NO. 2 AIR DUCT

6. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

(a) Interior Side:

Disconnect the heated oxygen sensor connector.





(b) Exterior Side:

(1) Remove the grommet.





(2) Using SST, remove the heated oxygen sensor from the front exhaust pipe.

SST : 09224-00010