Installation

POWER SOURCE / WIRING: BATTERY CURRENT SENSOR: INSTALLATION

1. INSTALL BATTERY CURRENT SENSOR





(a) Insert the hook of the ground terminal through the battery current sensor's hole. Then attach the hook to the parts labeled A of the bracket.

(b) Hook the bracket onto the hole on the engine room body, and install the battery current sensor assembly with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the connector to the battery current sensor assembly.

2. INSTALL FRONT FENDER PROTECTOR UPPER RH Installation

3. INSTALL ENGINE ROOM SIDE COVER RH Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

6. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.