Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2011 >> LS 460 AWD V8-4.6L (1UR-FSE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Engine Temperature Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





1UR-FSE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket to the engine coolant temperature sensor.

(b) Using a 19 mm ball joint lock nut wrench, install the sensor.

with ball joint lock nut wrench - Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)

without ball joint lock nut wrench - Torque : 20 Nm (200 kgf-cm, 14 ft-lbf)





NOTICE:
Do not use a tool such as an impact wrench or equivalent.

HINT
* Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).
* Make sure the ball joint lock nut wrench and torque wrench are connected in a straight line.

(c) Connect the engine coolant temperature sensor connector.

2. ADD ENGINE COOLANT Service and Repair

3. INSPECT FOR COOLANT LEAK Component Tests and General Diagnostics

4. INSTALL INTAKE AIR CONNECTOR PIPE Installation

5. INSTALL NO. 1 AIR CLEANER INLET Installation

6. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

7. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

8. INSTALL NO. 1 ENGINE UNDER COVER Service and Repair
pro multis · About Operation CHARM