Removal

2UR-FSE ENGINE CONTROL SYSTEM: KNOCK SENSOR: REMOVAL

HINT
When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE INTAKE MANIFOLD

(a) Remove the intake manifold Removal.

2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

3. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY Removal

4. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY LH Removal

5. REMOVE NO. 4 FUEL PIPE SUB-ASSEMBLY Removal

6. REMOVE SEPARATOR CASE

(a) Disconnect the fuel pressure sensor connector.





(b) Remove the 4 bolts and separator case.





7. REMOVE KNOCK SENSOR





(a) Disconnect the 4 sensor connectors.

(b) Remove the 4 bolts and 4 sensors.