Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2011 >> LS 600h V8-5.0L (2UR-FSE) Hybrid >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





2UR-FSE ENGINE CONTROL SYSTEM: KNOCK SENSOR: INSTALLATION

HINT
When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. INSTALL KNOCK SENSOR





(a) Install the 4 sensors with the 4 bolts so that the sensors are angled as shown in the illustration.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

HINT
The acceptable installation angle of the sensors is between 10° upwards and downwards from the horizontal position.

(b) Connect the 4 sensor connectors.

2. INSTALL SEPARATOR CASE





(a) Install the separator case with the 4 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the fuel pressure sensor connector.





3. INSTALL NO. 4 FUEL PIPE SUB-ASSEMBLY Installation

4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

5. INSTALL NO. 2 ENGINE COVER SUB-ASSEMBLY Installation

6. INSTALL NO. 2 ENGINE COVER SUB-ASSEMBLY LH Installation

7. INSTALL INTAKE MANIFOLD

(a) Install the intake manifold Installation.
pro multis · About Operation CHARM