Reassembly

HEATING / AIR CONDITIONING: REAR AIR CONDITIONING PANEL: REASSEMBLY

1. INSTALL CENTER CLUSTER MODULE LENS

(a) Remove the double-sided tape from the heater control knob.

(b) Wipe off any tape adhesive residue with cleaner.

(c) Remove the peeling paper from the a new center cluster module lens.

NOTICE:
After removing the peeling paper, keep the exposed adhesive free from foreign matter.

(d) Install the center cluster module lens.





Text in Illustration





NOTICE:
Do not reuse the center cluster module lens after removing it.

2. INSTALL HEATER CONTROL GUARD

(a) Install new heater control guard.





Text in Illustration





3. INSTALL CENTER CLUSTER MODULE CIRCUIT

NOTICE:
As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.

(a) Install the center cluster module circuit.





4. INSTALL LOWER HEATER CONTROL BASE

NOTICE:
As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.

(a) Install the 3 screws and lower heater control base.





(b) Attach the 6 claws to install the lower heater control base.





5. INSTALL UPPER HEATER CONTROL RETAINER

(a) Install the upper heater control retainer.