Installation

2GR-FE STARTING: ENGINE SWITCH: INSTALLATION

1. INSTALL ENGINE SWITCH

(a) Connect the engine switch connector.





(b) Attach the 2 claws to install the engine switch.





2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

3. INSTALL NO. 1 SWITCH HOLE BASE Installation

4. INSTALL INSTRUMENT PANEL GARNISH LH Installation

5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

6. INSTALL FRONT DOOR SCUFF PLATE LH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.