C1AE1

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: C1AE1: Front Left Sensor Malfunction
C1AE1 - Front Left Sensor Malfunction

DESCRIPTION

The No. 1 ultrasonic sensor (front left sensor) is installed on the front bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (front left sensor). If the No. 1 ultrasonic sensor (front left sensor) has an open or other malfunction, it will not function normally.





- *1: w/o Side Monitor System

- *2: w/ Side Monitor System

INSPECTION PROCEDURE

NOTICE:
If the DTC is output after repairs, turn the power switch on (IG) and turn the intuitive parking assist system on. Then clear the DTC Intuitive Parking Assist System.

PROCEDURE

1. CHECK DTC OUTPUT

(a) Check for DTCs Intuitive Parking Assist System.

Result:





C -- USE SIMULATION METHOD TO CHECK How To Proceed With Troubleshooting

B -- GO TO DTC (C1AEC) C1AEC
A -- Continue to next step.

2. REPLACE NO. 1 ULTRASONIC SENSOR (FRONT LEFT SENSOR)

(a) Replace the No. 1 ultrasonic sensor (front left sensor) with a normally functioning sensor Removal.





HINT
All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.

Text in Illustration





NEXT -- Continue to next step.

3. CHECK DTC OUTPUT

(a) Clear the DTCs Intuitive Parking Assist System.

(b) Check for DTCs Intuitive Parking Assist System.

Result:





C -- END (FRONT LEFT SENSOR WAS DEFECTIVE)

B -- REPLACE PARKING ASSIST ECU Removal

A -- REPLACE CLEARANCE WARNING ECU Removal