DTC CB-52

AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/o Navigation System): CB-52,CB-7E: No Playable iPod File Exists
CB-7E - No Playable USB File Exists

DESCRIPTION





INSPECTION PROCEDURE

HINT
After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK USB DEVICE OR "iPod"

(a) Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.

(b) Check if playable files are present on the USB device or "iPod".

HINT
Refer to System Description for playable files Audio and Visual System (w/o Navigation System).

Result:





B -- REPLACE USB DEVICE OR "iPod"

A -- END

2. REPLACE USB DEVICE OR "iPod"

(a) Turn the power switch off.

HINT
When one of these DTCs has been stored, it is necessary to turn off the power switch to make it possible for the vehicle to recognize a new device when it is connected.

(b) Turn the power switch on (ACC).

(c) Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

NEXT -- Continue to next step.

3. CLEAR DTC

(a) Clear the DTCs Audio and Visual System (w/o Navigation System).

NEXT -- Continue to next step.

4. RECHECK FOR DTC

(a) Recheck for DTCs and check if the same DTC occurs again.

HINT
If DTCs are detected frequently, replace the multi-media interface ECU.

OK:

Malfunction disappears.

NG -- REPLACE MULTI-MEDIA INTERFACE ECU Removal

OK -- USB DEVICE OR "iPod" WAS DEFECTIVE