Installation

AUDIO / VISUAL: MULTI-MEDIA INTERFACE ECU: INSTALLATION

1. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY

(a) Connect each connector.

(b) Engage the clamp.

(c) Install the multi-media interface ECU assembly with the 2 nuts.

2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation

3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

5. INSTALL SIDE INSTRUMENT PANEL LH Installation

6. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation

7. INSTALL FRONT DOOR SCUFF PLATE LH Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSPECT SRS WARNING LIGHT

Diagnosis System