Removal

2GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

1. REMOVE ENGINE UNDER COVER LH

2. REMOVE ENGINE UNDER COVER RH

3. DRAIN ENGINE COOLANT Testing and Inspection

4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

5. REMOVE COOL AIR INTAKE DUCT SEAL Removal

6. REMOVE ENGINE ROOM SIDE COVER LH Removal

7. REMOVE AIR CLEANER INLET ASSEMBLY Removal

8. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

9. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

10. REMOVE NO. 1 AIR CLEANER INLET Removal

11. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

(a) Remove the engine coolant temperature sensor connector.





(b) Remove the engine coolant temperature sensor.

(c) Remove the gasket from the engine coolant temperature sensor.