Removal

PRE-COLLISION: SEAT BELT CONTROL ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

3. REMOVE SPARE WHEEL COVER TRAY

4. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Disassembly

5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Disassembly

6. REMOVE REAR FLOOR FINISH PLATE Disassembly

7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH Disassembly

8. REMOVE SEAT BELT CONTROL ECU

(a) Disconnect the connector.





(b) Remove the 2 bolts.

(c) Disengage the claw and clip and remove the seat belt control ECU.