Second Row Seats

DISASSEMBLY







1. Remove the screw cover.







2. Remove the outboard hinge trim cover.
1. Remove the two screws.
2. Remove the outboard hinge trim cover.







3. Remove the inboard hinge trim cover.
1. Remove the screws.
2. Remove the inboard hinge trim cover.







4. Remove the flipper panel.
1. Remove the screws.
2. Remove the flipper panel.
^ Release the flipper panel latch.







5. Remove the flipper panel latch.
^ Release the tabs.







6. Remove the flipper panel striker.
1. Remove the screws.
2. Remove the flipper panel striker.







7. Remove the flipper panel trim cover.
^ Unzip the flipper panel trim cover.







8. Position the two seat back hinge cover flaps aside.
1. Remove the pin-type retainers.
2. Position the two seat back hinge cover flaps aside.







9. Disconnect the latch control cable housing from the seat back hinge assembly.
^ Remove the screw.







10. Unhook the latch control cable from the seat back hinge.







11. Remove the second row armrest.
^ Remove the four bolts (two each side).







12. Remove the seat cushion from the seat back.
1. Remove the four bolts.
2. Remove the seat cushion.
13. Unhook the seat back trim cover J-clips.







14. Unhook the seat back trim cover flaps.
^ Unhook the armrest opening seat back trim cover flaps.







15. Remove the seat back trim cover flap staples.







16. Remove the seat back.
1. Remove the seat back to hinge bolts.
2. Remove the seat back.

ASSEMBLY












1. To assemble, reverse the disassembly procedure.