Water Pump: Service and Repair

Removal
1. Drain the engine cooling system.
2. Remove the engine cooling fan and fan shroud.
3. Remove the drive belt.





4. Remove the water pump pulley.
1 Remove the bolts.
2 Remove the water pump pulley.





5. Remove the bolts.





6. Remove the (A) water pump from the (B) cylinder block.
^ Clean and inspect the mating surfaces.

Installation





1. Install the water pump.
1 Lubricate and install the O-ring seal.
2 Position the (A) water pump on the (B) cylinder block.
3 Loosely install the four bolts.





2. Tighten the bolts in the sequence shown.





3. Position the (A) water pump pulley on the (B) water pump and loosely install the bolts.





4. Tighten the bolts in the sequence shown.
5. Install the drive belt.
6. Install the engine cooling fan and fan shroud.
7. Fill the engine cooling system.