Headlamp: Service and Repair

REMOVAL
1. Raise and support the hood.
2. Disconnect the battery ground cable.







3. Remove the headlamp assembly.
1. Remove the headlamp assembly retainers by pushing rearward and pulling up.
2. Pull the headlamp assembly forward slightly to expose the electrical connectors.
3. Disconnect the electrical connectors and remove the headlamp assembly.

INSTALLATION
1. To install, reverse the removal procedure.
^ Adjust the headlamp.

NOTICE:
^ Be sure the headlamp assembly is positioned correctly with the alignment pins inserted into the proper holes and onto the ribs of the reinforcement.
^ When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.