Transmission Position Sensor/Switch: Service and Repair

Special Tools:

Removal
1. Disconnect the battery ground cable
2. Raise the vehicle on a hoist.





3. Disconnect the connector.





4. Disconnect the shift cable at the manual control lever.





5. Remove the digital Transmission Range (TR) sensor.
1 Remove the bolts.
2 Remove the digital Transmission Range (TR) sensor.

Installation





1. Install the digital Transmission Range (TR) sensor.
1 Install digital Transmission Range (TR) sensor.
2 Loosely install the bolts.





2. NOTE: Make sure that the manual control lever is in the neutral position.

Install the Digital Transmission Range (TR) Sensor Alignment Tool. The tool is designed to fit snug.





3. Tighten the bolts.





4. Reconnect the shrift cable at the manual control lever.





5. Reconnect the connector.
6. Lower the vehicle.
7. Reconnect the battery ground cable.