Third Row
Safety Belt Bolt Bit:
Special Tool(s)
REMOVAL
NOTE: This procedure is for the LH side; the RH side is similar.
1. Remove the safety belt guide bolt cover.
- Carefully pry out at the bottom.
2. Use Safety Belt Bolt Bit to remove the safety belt guide bolt.
3. Remove the quarter trim panel.
NOTE: On vehicles equipped with auxiliary A/C, only the auxiliary A/C access panel needs to be removed and not the quarter trim panel.
4. Remove the detachable anchor.
- Depress the release button.
5. Remove the rear safety belt retractor.
1 Use Safety Belt Bolt Bit to remove the bolt.
2 Remove the retractor.
6. Remove the detachable anchor tongue trim cover.
1 Remove the bolt.
2 Remove the pushpin.
3 Remove the trim cover.
NOTE: Steps six and seven are only necessary if the detachable anchor tongue has to be replaced.
7. Remove the detachable anchor tongue.
1 Use Safety Belt Bolt Bit to remove the bolt.
2 Remove the detachable anchor tongue.
INSTALLATION
1. To install, reverse the removal procedure.
- Check the restraint system for proper operation.