C-Pillar Trim Panel

C-Pillar Trim Panel

Removal and Installation

1. Remove the safety belt anchor bolt.
- To install, tighten to 40 Nm (30 lb-ft).





2. Remove the safety belt cover from the C-pillar trim panel.





3. Remove the upper C-pillar trim panel.
- Pull outward to release the C-pillar trim panel clips.

4. Carefully reposition the safety belt cover through the C-pillar trim panel.

5. NOTICE: To avoid damage to the C-pillar trim panel, remove any retaining clips from the body and attach them to the C-pillar trim panel before installing.

To install, reverse the removal procedure.