Switch State Control

Key Programming Switch State Control - Intelligent Access (IA)





NOTE: The spare key programming switch is a programmable switch which provides the capability to enable/disable the normal customer spare key programming procedure detailed in the Owner's Literature. It must read ENABLE if more than 2 keys need to be programmed into the Remote Function Actuator (RFA) module using the Key Programming Using Two Programmed Keys - Intelligent Access (IA) Using Two Programmed Keys. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the spare key programming procedure available to the vehicle driver.

NOTE: If the SPAREKEY PID reads ENABLE, up to 4 keys total can be programmed into the RFA module using Key Programming Using Two Programmed Keys - Intelligent Access (IA) Using Two Programmed Keys. If the SPAREKEY PID reads DISABLED, the Key Programming Using Two Programmed Keys - Intelligent Access (IA) Using Two Programmed Keys procedure cannot function. This switch is set to ENABLE when the vehicle is built. This PID does not affect the Key Programming Using Diagnostic Equipment - Intelligent Access (IA) Using Diagnostic Equipment procedure.

1. From the scan tool, ENTER SECURITY ACCESS. For additional information, refer to Anti-Theft Security Access - Intelligent Access (IA) Anti-Theft Security Access.

2. From the scan tool menu select: "Customer Spare Key Programming Enable" (or "Customer Spare Key Programming Disable") and follow the Integrated Diagnostic System (IDS) on-screen instructions.
- "Customer Spare Key Programming Enable" - the spare key programming procedure is accessible.

- "Customer Spare Key Programming Disable" - the spare key programming procedure is not accessible.