Instrument Panel Cluster (IPC)

Instrument Panel Cluster (IPC)









Removal and Installation

NOTE: If installing a new Instrument Panel Cluster (IPC), all vehicle keys are erased during the parameter reset procedure. Verify at least 2 of the vehicle keys are available prior to carrying out this procedure.

1. If installing a new IPC, upload the module configuration information to the scan tool. For additional information, refer to Information Bus.

2. Remove the instrument cluster finish panel. For additional information, refer to Instrument Panel - Exploded View in Instrument Cluster / Carrier &/or Interior Moulding / Trim.

3. Lower the steering column to the lowest position.

4. Remove the 4 steering column reveal panel screws and the steering column reveal panel.

5. Remove the 4 screws and the IPC.
- Disconnect the electrical connector.

6. To install, reverse the removal procedure.