Operation CHARM: Car repair manuals for everyone.

20000 MI or 32000 KM

Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness, or drag, If using special operating conditions.
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate (if equipped with zerk fittings). If using Special Operating Conditions T, I and D, O
    Brakes and Traction Control
      Inspect brakes if using Special Operating Conditions I.
    Ball Joint
      Steering Ball Joints
Replace
    Oil Filter, Engine
      Change engine oil every 5,000 miles or 6 months if using Special Operating Conditions T, D, O, E. Change engine oil every 5,000 miles or 6 months or 200 hours of engine operation if using Special Operating Conditions I.
    Engine Oil
      Change engine oil every 5,000 miles or 6 months if using Special Operating Conditions T, D, O, E. Change engine oil every 5,000 miles or 6 months or 200 hours of engine operation if using Special Operating Conditions I.
    Cabin Air Filter / Purifier
      Replace cabin air filter as required (if equipped) if using Special Operating Conditions I, D and O if applicable.
Rotate
    Tires
      Rotate tires, inspect tires for wear, measure tread depth and inspect wheel ends for end play and noise. Vehicles with dual rear wheels should only rotate if unusual wear is noted. For vehicles with different front-to-rear tire pressures, the tire pressure must be adjusted and the tire pressure sensor training must be done. If using Special Operating Conditions T, I, D, O or E.