Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
DS II
1.
Disconnect module connector with red and white wires then,
ignition coil connector.
2.
Using a suitable ohmmeter, measure resistance between Batt. terminal of
ignition coil connector and wiring harness connector wire that joins red wire in module connector.
3.
If resistance is 0.8---1.6 ohms, ballast resistor is satisfactory. If resistance is less than 0.8 ohms or greater than 1.6 ohms, replace ballast resistor.