Operation CHARM: Car repair manuals for everyone.

Body Side Moulding - Gaps to Fender

84ford12

Article No. 84-15-1


EXTERIOR TRIM - BODY SIDE MOULDING - GAPS TO FENDER


LINCOLN-MERCURY 1984 MARK VII

Figure 1:




Vehicles built before 10/17/83 may exhibit the body side moulding gaping at the front fender. To service this concern, remove the existing (moulding attaching) sleeve nut and discard. Add a nut and washer assembly to the existing threaded moulding fastener as shown in Figure 1.
1. Remove (1) sleeve nut retaining moulding and discard sleeve nut. (Partial removal of splash shield is required - see Shop Manual 47-12-10, Figure 9.)
2. Install (1) nut and washer assembly to retain moulding (reinstall splash shield).


PART NUMBER PART NAME CLASS

N620370-S36M Nut and Washer Assembly S


OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP16122A84
TIME: One - 0.6 Hr. Both - 1.0 Hr. DLR. CODING: Basic Part No. 7016122 Code: 55