Wire Harness Terminal and Connector - Service Kit
89Ford30WIRING-WIRE HARNESS TERMINAL AND CONNECTOR SERVICE KIT
Article No. 89-19-5
FORD: 1990 and prior ALL FORD LINES
LINCOLN-MERCURY: 1990 and prior ALL LINCOLN-MERCURY LINES
MERKUR: 1990 and prior ALL MERKUR LINES
LIGHT TRUCK: 1990 and prior ALL LIGHT TRUCK LINES
MEDIUM/HEAVY TRUCK: 1990 and prior ALL MEDIUM/HEAVY TRUCK LINES
This TSB article is being republished in its entirety to make dealers aware of availability of the wiring harness terminal and connector repair kit.
ISSUE: A wire harness terminal and connector repair kit is available for repairing electrical wire harnesses. This kit allows dealers to repair broken or corroded terminals and connectors instead of replacing an entire wire harness. The kit is easy to use and allows the technician to perform a professional looking repair in a short period of time.
ACTION: To purchase a wire harness terminal and connector repair kit, contact Altair International Incorporated. Refer to the following information for ordering details.
ALTAIR INTERNATIONAL INC.
ATTN: SALES DEPARTMENT
22800 HALL ROAD
MT. CLEMENS, MI 48043
TELEPHONE: (313) 466-1200
An order form is included in the back of this TSB issue. To order:
^ Fill out the order form.
^ Enclose a check for the total amount. (This kit cannot be charged to your dealership parts code.)
^ Send the completed form and check to the ALTAIR INTERNATIONAL INC.
The kit consists of:
^ Two 50 drawer metal cabinets that contain 6 each of the 96 different terminals, machined crimped with a four inch "pigtail" of 12 or 16 gauge wire.
^ A unique, high compression crimping tool that will make sure of a solid connection preventing moisture or contaminants from affecting the wire splice.
OTHER APPLICABLE ARTICLES: none
SUPERSEDES: 88-17-5, Date 8/17/88
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 2770, 2700