Front

Fig. 16 Front toothed sensor ring removal:

REMOVAL
1. Remove wheel and tire assembly.
2. Remove brake caliper and rotor assemblies.
3. Position rotor assembly on an arbor press with studs facing up, then carefully press each stud individually until they contact sensor ring surface.
4. Press studs and sensor ring out of rotor simultaneously, Fig. 16.

Fig. 17 Front toothed sensor ring installation:

INSTALLATION
1. Install studs into rotor one at a time.
2. Position sensor ring onto rotor, then press ring until fully seated, Fig. 17.
3. Install rotor and caliper assemblies, then the wheel and tire.