Attachment III - Technical Instructions
ATTACHMENT IIIB Program
OWNER NOTIFICATION PROGRAM 93B31
AOD Transmission - Throttle Body Lever Grommet
TECHNICAL INSTRUCTIONS
THROTTLE BODY LEVER GROMMET REPLACEMENT PROCEDURES
1. Pull the TV cable/rod trunnion out of the throttle body lever grommet.
2. Remove and discard the urethane grommet from the throttle body lever.
3. Place the new brass bushing in the throttle body lever by inserting the smaller diameter section into the lever. The large diameter should be on the TV cable side of the throttle body lever
4. Insert the trunnion of the TV rod completely into the brass bushing and install the retaining clip in the groove of the TV rod trunnion.