AA14 - Check PIP With PCM Disconnected

^ Disconnect PCM.

^ Crank engine and measure voltage between:
J34 (PIP A) and J7 (B-) if 8 pin CMP sensor connector
or
J13 (PIP) and J7 (B-) if 4 pin CMP sensor connector.

^ Is voltage between 3.0 and 8.5 volts AC?


YES -- Replace PCM. Remove all test equipment. Reconnect all components. Clear continuous memory. Rerun quick test.


NO -- Go to AA15. AA15 - Check PIP A to PCM For Short High