HC11 Component Check (Air Spring Solenoid Valve Toggle Check)

^ It is now desired to activate the Air Spring Solenoid Valve Toggle functional test. In order to do this the following actions are required:

^ Release STAR test button so that it remains in the up HOLD position after code 33 has been displayed for at least 5 seconds.

NOTE: As long as STAR test button is in the up HOLD position the selected functional test will continue. The Air Spring Solenoid Toggle test is used to verify that air suspension control module can activate each of the air spring solenoid valves by cycling them ON and OFF continuously until STAR test button is depressed down again.

^ Right rear air spring solenoid valve is:

Cycling on/off continuously -- GO to HC15.

Remains off -- GO to HC12.