IA7 Compressor Cool Down
^ The air compressor has an internal thermal non-cycling circuit breaker in it that opens the B+ power supply to the air compressor armature when the internal temperature exceeds a predetermined limit. In order for this thermal circuit breaker to be reset the following two things must happen:
1) The internal temperature must drop below the predetermined limit.
2) The power to the compressor must be off.
^ In this part of the test, allow the compressor to cool down for 15 minutes. The air compressor thermal circuit breaker may have been tripped by repeatedly running diagnostic checks.
^ Has at least 15 minutes elapsed since air compressor was disconnected from vehicle wiring harness?
YES -- GO to IA8.
NO -- CONTINUE with Step IA7 until 15 minutes has elapsed.