ID24 Inflate Left Rear Air Spring

^ To inflate left rear air spring, the following action is required:

^ Release STAR test button so that it remains in the HOLD position after code 28 has been displayed for at least 5 seconds.

NOTE: As long as STAR test button remains in the up HOLD position the left rear air spring will continue to be inflated. When the desired amount of inflating has occurred depress STAR test button so that it remains in the TEST position.

^ Left rear corner of vehicle has been raised so that gap between fender lip opening and top of tire is approximately 3 inches or greater:

Very slowly or none at all -- DEPRESS STAR test button down so that it remains in the TEST position. Then GO to ID25.

Slowly or at a normal rate -- REPEAT Service Bay normal rate Diagnostics and if problem still occurs INSTALL a new air suspension control module and then REPEAT Service Bay Diagnostics. Reading and Clearing Diagnostic Trouble Codes