Quick Test Pre-Test Checks

Check that battery 18 fully charged (If not, it may be causing the concern). Disconnect and reconnect battery to reset system.

CAUTION: Do not replace parts unless test results say they should be replaced.

Do NOT perform any Pinpoint Tests unless so instructed by the Quick Test. Doing so may produce incorrect results and services. After completing any Pinpoint Test service, return to the Quick Test. Do NOT continue with other Pinpoint Tests.

To test and service electronic door lock control system:

NOTE: Keep the driver window rolled down during the Quick Test and the Pinpoint Tests, to avoid being locked out of the vehicle.

^ Perform the Quick Test as outlined.
^ Perform the Pinpoint Tests as specified by the Quick Test (only perform them when a step of the Quick Test has failed.)
^ Service only as specified in the tests.
^ Repeat the Quick Test to make sure the system is operational.