AA18 - Check PIP Circuit For Short to Power and Ground

- Key "OFF".

- Breakout box installed.

- Powertrain Control Module (PCM) disconnected.

- Governor Control Module (GCM) disconnected.

- Camshaft Position (CMP) sensor disconnected.

- Measure resistance between test pin 56 and test pins 16, 20, 40, 46 and 60 (short to ground) and test pins 26, 37 and 57 (short to power).

- Is each resistance greater than 10,000 ohms?

Yes -- Go to AA19. AA19 - Isolate Shorts In PCM

No -- Service short circuit. Remove breakout box. Reconnect all components. Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)