TG95 - Check For DTC 675 With DTC 667
Diagnostic Trouble Code (DTC) 667 indicates the Manual Lever Position (MLP) circuit voltage was below the allowed minimum voltage.
Possible causes:
- Damaged MLP sensor.
- Short to ground in MLP harness SIG circuit.
- Open in MLP harness SIG circuit.
- Damaged Powertrain Control Module (PCM).
- Did DTC 675 repeat with DTC 667 during the drive cycle test?
Yes -- Go to TG99. TG99 - Check Continuity of Sensor Harness SIG Circuit
No -- Go to TG96. TG96 - Check For DTC 675 Generated With DTC 668