AG RR Shock Actuator Desired Position Not Detected

Shock Absorber Electronic Actuator Desired Position Not Detected - Right Rear

PINPOINT TEST AG: SHOCK ABSORBER ELECTRONIC ACTUATOR DESIRED POSITION NOT DETECTED-RIGHT REAR:

PINPOINT TEST AG: SHOCK ABSORBER ELECTRONIC ACTUATOR DESIRED POSITION NOT DETECTED-RIGHT REAR (Continued):

The Control Module did not receive a signal that the right rear shock absorber electronic actuator went to the desired position when activated. There are seven possible causes of the shock absorber electronic actuator not switching to the desired position.
1. SOFT or FIRM relay circuit is inoperative.
2. Vehicle wiring harness power supply circuit to right rear shock absorber electronic actuator is shorted to ground or has an open in it.
3. Right rear shock absorber electronic actuator position circuit is shorted to ground or has an open in it.
4. Vehicle wiring harness connector for right rear shock absorber electronic actuator does not have all wires in correct location.
5. Right rear shock absorber electronic actuator is inoperative.
6. Right rear spring and shock absorber assembly on vehicle is binding preventing shock absorber electronic actuator from switching to desired position.
7. Control Module is inoperative.