Canister Purge Control Valve: Service and Repair
REMOVAL1. Remove the front fender splash shield.
2. Remove the bolts from the Evaporative Emission (EVAP) canister purge valve bracket.
3. Disconnect the connector from the EVAP canister purge valve.
4. Disconnect three hoses from the evaporative emission canister purge valve.
5. Remove the evaporative emission canister purge valve.
1 Remove the bolts from the evaporative emission canister purge valve.
2 Remove the evaporative emission canister purge valve from the vehicle.
INSTALLATION
Follow the removal procedure in reverse order.