Drains Which Shut Off When the Battery Cable Is Disconnected

1. Repeat the steps of the field circuit drain testing.
2. Without starting the engine, turn the ignition ON for a moment and then off. If applicable, wait one minute for the illuminated entry lamps to turn off.
3. Connect the voltmeter and read the voltage.
The current reading (current drain) should be less than 0.05 amps. If it exceeds 0.05 amps after a few minutes, and if this drain did not show in previous tests, the drain is most likely caused by a malfunctioning electronic component. As in previous tests, remove the fuses from the interior fuse panel one at a time to locate the problem circuit.